Company: Lantytk® Corp
ADD: NO.5558 CHUANSHA ROAD, PUDONG DISTRICT, SHANGHAI, CHINA
E-mail:globalsales2013@gmail.com

Home » Products » Pharmaceutical Filler Sealer » Ultrasonic Bottle Washer

Ultrasonic Bottle Washer

There are two types of ultrasonic bottle washer in our company SD-CT-16 and QCLX40 introduced as follows.

1. SD-CT-16 Ultrasonic Bottle Washer  

Description:
The SD-CT-16 ultrasonic bottle-washing machine can be used as inside bottle washing as well as out side bottle washing. Bottles such as oral taken bottles, mould bottles, medicine bottles can use the machine. It is equipped with electricity controlling system. The equipment can work independently or be used to work with a whole line taht conected to other machines to form a st of production line.

Feature:
1. It is in upright drum structure, and can finish all the process such as getting bottle , ultrasonic bottle washing , nipping bottle by machine hand ,turning over bottle, springing water ,rinsing water ,rinsing gas and so on.
2. 40 or 60 heads is viable for choice to meet different out put.

Technical Parameters:
Wash Bottle Size 5-3ml
Air Compression 0.6Mpa
Power 3.8KW 380V 50HZ
Production Ability 2000-22000 Bottle/H
Water Consumption 0.36m3/h
2.QCLX40 Ultrasonic Bottle Washer

Description:
The QCLX40 ultrasonic bottle washer machine is used for the rinse of ampoule bottles, Vial bottles and infusion bottles wether plastic or glass, with outside diameter between diameter 10-30mm.

Operating Principle
1. Put all the bulk bottles into the ultrasonic washing tank for ultrasonic washing about 80 seconds.
2. Then the bottle feeding spriral conveyer will send the bottles to the lift driver wheel, and then the lifting wheel will send the bottles to the big drum.
3. The bottles will be clamped by a manipulator and turned over for 180° (bottle mouths downward), rotating along with the big roatating disk.
4. There are 6 group jet pipe with jet needles under the big roatating disk tracks. Water or  compressed air will send (spray) to into the bottles, with certain frequency that depending on the washing requirement. Normally one complete washing procedure is that, there are circulating water spraying for two times, compressed air spraying for once, purifying compressed air spraying for two times again.
5. During that inside washing, there are water and compressed air praying and for outside bottles washing.
6. So that the washing for bottles is completed, then the washed bottles turn over for 180° (bottle mouths upward) by manipulator, feeding into a tunnel type oven by driver disk.
7. The frequency conversion can control the washing speed and productive capacity and also control and adjust the sequential coordination of each procedure.

Technical Parameters of QCLX40 Ultrasonic Bottle Washer:
Power Source 380V 50Hz
Total Power 13kW
Ultrasonic Power 600W 27KHz
Washing Range Bottle Diameter 10-30mm
Production Ability 12000Bottle/H
Pressure 0.35-0.45Mpa
Water Pressure 0.3-0.4Mpa
Water Consumption 0.38m3/h
Air Consumption 30m3/h
Broken Shoot <1%
Weight About 2000kg
Dimensions 2070x2100x1300(mm)(LxWxH)

Lantytk® Corp is a professional manufacturer of ultrasonic bottle washer in China. Apart from ultrasonic bottle washer, we still provide linear filling capping machine, automatic rotary filling sealing machine, semi automatic liquid filler and capper, etc. And our products have been quite popular among customers from Syria, Libya, Iraq, Egypt, Pakistan, Jordan, Turkey, Iran, Italy, Britain, the United States, Indonesia, Malaysia, Algeria, Sudan, Tanzania, Russia, Saudi Arabia, and so on. If you need our ultrasonic bottle washer, please don't hesitate to contact us.

Related Products
  • Semi Automatic Liquid FillerThe semi automatic liquid filler(liquid filling machine) is suitable for the filling of fluid with the filling capacity of 100ml, 250ml, 400ml, 600ml, and...